Index of AN21 Clevis Bolts

AN21 BOLT, CLEVIS

Clevis Bolts | Body Diameter: .136"-.134" | .1380-40 UNF-3A | Head Diameter: .313 +/- .016

Codes:

Add "A" after the dash number for bolt without cotter pin hole.

Lengths longer than tabulated below are available in .125" increments (even dash numbers only). Grip lengths of bolts shall be measured from the underside of the head to the end of the full cylindrical portion of the shank.

–

UNDRILLED, ALLOY STEEL, CADMIUM PLATED (EXAMPLE: AN21-5A)

PART NUMBER	GRIP ±.016	LENGTH ±.016
AN21-5A	0.063	0.344
AN21-6A	0.125	0.406
AN21-7A	0.188	0.469
AN21-8A	0.250	0.531
AN21-9A	0.313	0.594
AN21-10A	0.375	0.656
AN21-11A	0.438	0.719
AN21-12A	0.500	0.781
AN21-13A	0.563	0.844
AN21-14A	0.625	0.906
AN21-15A	0.688	0.969
AN21-16A	0.750	1.031
AN21-17A	0.813	1.094
AN21-18A	0.875	1.156
AN21-19A	0.938	1.219
AN21-20A	1.000	1.281
AN21-21A	1.063	1.344
AN21-22A	1.125	1.406
AN21-23A	1.188	1.469
AN21-24A	1.250	1.531
AN21-25A	1.313	1.594
AN21-26A	1.375	1.656
AN21-27A	1.438	1.719
AN21-28A	1.500	1.781
AN21-29A	1.563	1.844
AN21-30A	1.625	1.906
AN21-31A	1.688	1.969
AN21-32A	1.750	2.031
Note: All values are in inches.

COTTER PIN HOLE, ALLOY STEEL, CADMIUM PLATED (EXAMPLE: AN21-5)

PART NUMBER	GRIP ±.016	LENGTH ±.016
AN21-5	0.063	0.344
AN21-6	0.125	0.406
AN21-7	0.188	0.469
AN21-8	0.250	0.531
AN21-9	0.313	0.594
AN21-10	0.375	0.656
AN21-11	0.438	0.719
AN21-12	0.500	0.781
AN21-13	0.563	0.844
AN21-14	0.625	0.906
AN21-15	0.688	0.969
AN21-16	0.750	1.031
AN21-17	0.813	1.094
AN21-18	0.875	1.156
AN21-19	0.938	1.219
AN21-20	1.000	1.281
AN21-21	1.063	1.344
AN21-22	1.125	1.406
AN21-23	1.188	1.469
AN21-24	1.250	1.531
AN21-25	1.313	1.594
AN21-26	1.375	1.656
AN21-27	1.438	1.719
AN21-28	1.500	1.781
AN21-29	1.563	1.844
AN21-30	1.625	1.906
AN21-31	1.688	1.969
AN21-32	1.750	2.031
Note: All values are in inches.

The prints & data found here within are not to be used for the manufacturer, procurement, or use of this product. They are for educational proposes only.