MS21069 Product Index

Products ➔

MS Product Index ➔

NUT, SELF-LOCKING, PLATE, TWO-LUG, REDUCED RIVET SPACING, LOW HEIGHT, STEEL, 125 KSI Ftu, 450 °F

Part Number Codes:

Add "-" after basic part number for non-dry film lube.

Add "L" after basic part number for dry film lube.

Add "K" after the dash number for countersunk or dimpled rivet holes.

–

Cadmium plated with non-dry film lube (EXAMPLE: MS21069-3)

PART NUMBER	Thread	Length Max	Height Max
MS21069-02	.0860-56 UNJC-3B	.410"	.110"
MS21069-04	.1120-40 UNJC-3B	.630"	.143"
MS21069-06	.1380-32 UNJC-3B	.661"	.171"
MS21069-08	.1640-32 UNJC-3B	.692"	.250"
MS21069-3	.1900-32 UNJC-3B	.724"	.250"
MS21069-4	.2500-28 UNJC-3B	.786"	.281"
MS21069-5	.3125-24 UNJC-3B	1.006"	.328"
MS21069-6	.3750-24 UNJC-3B	1.116"	.344"

–

Plating type optional with Dry film lube (EXAMPLE: MS21069L3)

PART NUMBER	Thread	Length Max	Height Max
MS21069L02	.0860-56 UNJC-3B	.410"	.110"
MS21069L04	.1120-40 UNJC-3B	.630"	.143"
MS21069L06	.1380-32 UNJC-3B	.661"	.171"
MS21069L08	.1640-32 UNJC-3B	.692"	.250"
MS21069L3	.1900-32 UNJC-3B	.724"	.250"
MS21069L4	.2500-28 UNJC-3B	.786"	.281"
MS21069L5	.3125-24 UNJC-3B	1.006"	.328"
MS21069L6	.3750-24 UNJC-3B	1.116"	.344"

–

Cadmium plated with non-dry film lube, countersunk or dimpled rivet holes (EXAMPLE: MS21069-3K)

PART NUMBER	Thread	Length Max	Height Max
MS21069-06K	.1380-32 UNJC-3B	.661"	.171"
MS21069-08K	.1640-32 UNJC-3B	.692"	.250"
MS21069-3K	.1900-32 UNJC-3B	.724"	.250"
MS21069-4K	.2500-28 UNJC-3B	.786"	.281"
MS21069-5K	.3125-24 UNJC-3B	1.006"	.328"

–

Plating type optional with dry film lube, countersunk or dimpled rivet holes (EXAMPLE: MS21069L3K)

PART NUMBER	Thread	Length Max	Height Max
MS21069L06K	.1380-32 UNJC-3B	.661"	.171"
MS21069L08K	.1640-32 UNJC-3B	.692"	.250"
MS21069L3K	.1900-32 UNJC-3B	.724"	.250"
MS21069L4K	.2500-28 UNJC-3B	.786"	.281"
MS21069L5K	.3125-24 UNJC-3B	1.006"	.328"

The prints & data found here within are not to be used for the manufacturer, procurement, or use of this product. They are for educational proposes only.